Thursday 11/03/2010 12:06:43
Use Logos
Use of Certificate of Quality Approval 23/04/2009 17:34:18
The client shall comply with the following conditions governing the use of the Certificate and mark/symbol of Certificate Body

1. Use of Certificate of Quality Approval

 

-          The certificate shall remain the property of the Certification Body

 

-          Certificates are valid for three years from the date of the certificate issue, subject to satisfactory annual surveillance assessments.

 

-          Certificates are not transferable

 

-          The certificate shall only be displayed at the location applicable to the certificated scope of supply.

 

-          The certificate shall not be used to imply certification of any location other than that detailed on the certificate.

 

-          The certificate shall not be used in any way to imply  product approval

 

-          The certificated Client must advise the Certification Body of any changes which may affect the scope of supply

 

-     The certificated Client must advise the Certification Body of any changes which may affect the scope of supply

 

 

2. Use of DAS Quality Services/UKAS Mark

 

 

 

 

-          The marks above shall always be used on certificates issued in conjunction with the Client's name and have the certificate number adjacent to it.

 

-          The mark may be reproduced in any size or single colour provided the configuration is strictly adhered to, including the surrounding frame.

 

-          The mark may be reproduced in any size or single colour provided the configuration is strictly adhered to, including the surrounding frame.

 

-          The mark shall not be used on flags

 

-     The mark shall not be used in any way to imply product approval, nor on documentation such as test certificates and certificates of conformity

 

3. Failure to Comply with the Certification Conditions

 

-          Suspension and withdrawal of certificate approval

 

-          If the Client/certificate holder fails to maintain compliance with the requirements of ISO9001 or ISO14001, those requirements detailed in Certification Conditions Document form P24/02 and those commercial and operating requirements of the certification body then;

 

-          The client/certificate holder is formally informed in writing/fax/phone/email about the failure of compliance to the above conditions and asked to detail corrective action.

 

-     If the client refuses to respond to correct the failure of non-compliance to the above conditions then the Senior Executive shall contact the client and inform the client that the certificate may be suspended initially for 6 months and after 6 months the client is informed that the certificate is cancelled and would the client return the certificates and cease to use and distribute any literature, stationary, etc., referencing the certificate of Certification Body mark/symbol.

 
VIDEO ISO/IEC 27000
Access Counter:
1280190